Home
»
About
»
Emergency Information
»
Emergency Response Plan
»
North Campus Sector Evacuation Procedures
North Campus Sector Evacuation Procedures
- Sector Leader Checklist (PDF). Sector leader clipboards containing a walkie-talkie, vest, map, and flashlight are located in each sector.
- Sector Coordinator Checklist (PDF). A sector coordinator clipboard containing a blank checklist, walkie-talkie, vest, maps, and flashlight are located in the CSO desk.
- Upon issuance by the CSO (sector coordinator) via the public-address system of an evacuation to shelter area notice (Code Blue), or building evacuation or activation of the fire alarm (Code Red), each sector leader is to retrieve the sector clipboard, put on the sector vest, and put the batteries in the walkie-talkie and turn unit on to channel 4 (volume up).
- The CSO will retrieve the sector coordinator clipboard, put on the sector vest, and put the batteries in the walkie-talkie and turn unit on to channel 4 (volume up).
- Follow appropriate building evacuation (Code Red) or evacuation to shelter area (Code Blue) procedures. If safety permits, close doors to evacuated rooms and leave lights on.
- After sector evacuation is complete (either building evacuation or evacuation to shelter areas), report back to the CSO "sector (number) clear". The CSO will respond "sector (number) clear confirmed" to alert you that your transmission was received. The CSO will check off each cleared sector on the checklist.
- If a "sector clear" is not received within a reasonable amount of time, the CSO will request a "sector clear status" until a one is received from the sector leader.
- If someone is injured, advise the CSO of the situation via the walkie-talkie.
- The CSO will report via the walkie-talkie when an "All Clear" situation exists.
- Advise evacuees of the "All Clear" status or any other directives given.
- Return clipboard and contents (remove batteries from the walkie-talkie) back to its location.
- Walkie-talkie units and flashlights will be tested monthly by the CSO to ensure they are in proper operating condition.